-
What are the commonly used quenching media for forgings?
The medium used for quenching of forgings is called quenching cooling medium (or quenching medium). The ideal quenching medium should have the condition that the forging can be quenched into martensit
2019-03-18 18
-
Quality classification of carbon steel materials in forging processing
According to the quality of carbon steel, it can be divided into ordinary carbon steel and high quality carbon steel.(1) Ordinary carbon structural steel, also known as ordinary carbon steel, has a wi
2019-03-18 16
-
Introduction of turning and sharpening in forging machining
The forging blanks rely mainly on the rotating main motion and the feed motion of the tool on the lathe to complete the cutting action. Therefore, whether the selection of the turning angle is reasona
2019-03-18 15
-
How does the forging factory operate the air hammer?
First, the forging factory forging workshop is connected to the power supply. After starting the air hammer, the upper and lower rotary valves are operated by the handle or the foot lever, so that the
2019-03-18 12
-
Production analysis of large diameter carbon steel flange
Large-diameter carbon steel flanges have perforations on the flanges, which can be bolted so that the two flanges are tightly connected and the flanges are sealed with gaskets. When the large-diameter
2019-03-16 28
-
The significance of forging process optimization
In actual forging production, when the geometry of the forging is complicated or the traditional design method has limitations, the unreasonable forging process and mold design may make the internal s
2019-03-16 24
-
Method for removing crane wheel rails
Generally, it is more objective to judge the severity of the rail by the amount of wear of the wheel rim. The wear of the rim is greater than 1 mm, which is a serious rail and must be repaired.Adjustm
2019-03-16 12
-
The properties of the steel used in forgings and the casting process
In the process of heating and heat preservation of the steel used in the forging, the surface of the steel is lost by the surrounding oxidizing atmosphere, and all or part of the carbon is lost. This
2019-03-16 19